Transport all types of bikes with Saris’ Freedom 2-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright support even tilts down to allow trunk access. Plus, the rack itself only weighs 21 pounds, making it easy to take on and off.
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
$19.99 - $32.99
Evo's Fork Mount Carrier easily installs in your truck bed or anywhere else you need a simple fork mount carrier. The 15 and 20mm mounts use a Teflon sleeve to protect your axle, and the 9mm includes a QR skewer.
Thule says their Fairing is a stylish roof-rack accessory that decreases noise and wind resistance. But we both know what you'll use it for: plastering it with all your stickers. That's okay, we do the same thing. This polycarbonate shield fits both square and Rapid Aero crossbars (sold separately), comes in several widths to fit a wide range of vehicles, and is built for rigidity to alleviate wind-slap.
An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
Yakima pulled out all the stops creating the King Joe trunk rack. It carries 2 bikes and fits most vehicles. It attaches with 6 straps, can easily be adjusted for a perfect fit and has padded feet that stabilize the rack and protect the car. The King Joe's oversize Quick-Trigger Hubs make installation and removal a snap. And, its integrated Switchblade cradles hold bikes safely and securely. Crafted from heavy-duty steel tubing, the Mighty Joe is fully assembled and ready to use right out of the box, too.
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
$328.99 - $329.00
Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs
Don’t let some jerk steal your bike! Since SeaSucker bike racks aren’t bolted on to rooftop bars, we came up with a way to keep your bike safe. A Cable Anchor is just what it sounds like – an anchor point to securely connect a cable loop to your car. The Cable Anchor – Window, slides over the glass and rolls up into the window frame. Each is made of polished stainless steel and has a wide 1.375-inch hole to thread a cable lock through. The Cable Anchor - Window, is not recommended for tinted windows.
$12.99 - $13.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
$389.00 - $397.99
Kuat's Transfer 3 offers all the Kuat quality you would expect at a price that's sure to please privateer racers and weekend riders alike. Sturdy steel construction won't leave your precious cargo bouncing along the road, and it fits both 1.25 and 2-inch trailer hitch receivers. It holds three bikes and the wheel trays fit tires up to four inches wide. Bikes mount securely with an adjustable locking arm and a deep, stable wheel tray. And, there's no contact with your bike's frame so your bike will come off the rack looking just as good as when you put it on.
Our Hornet 1-bike rack is a small-scale revolution. We call it the “Smallest Bike Rack in the World” because it is. The Hornet is so compact that it fits into an included 9.5x”x4-inch zippered carrying case for easy storage and travel. The Hornet is far and away the most travel-friendly rack on the market, but it works equally well for everyday use. The Hornet is our first “leave-the-front-wheel-on” bike rack. It is designed to mount to the back window of any hatchback, SUV or minivan using two of SeaSucker’s powerful 4.5-inch vacuum cups (120lb rated pull-strength each) to hold the handlebars and hang a bike weighing not more than 35 lbs from the rear glass. Plastic ladder straps securely hold both road and MTB bars to the vacuum cups. As with all SeaSucker bike racks, the pump-action vacuum cups also allow the user to attach the rack in just seconds, making the Hornet one of the easiest and fastest racks to install. Simply pump the two vacuum cups onto the back windshield, close the ladder straps around the bars and you’re done. And when it comes time to remove it, the Hornet detaches just as quickly and breaks back down into its component parts for storage in its case. The Hornet also comes with a safety strap that loops around the bike’s steerer tube and into a sewn-in cam buckle. The strap’s tail has a built-in plastic peg that, when closed in the hatchback, secures the strap to the car.
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
2019 Model Mini Bomber comes standard with our Universal Huske Fork Mount upgrade, with 9mm plugs and quick release skewer. The Mini Bomber is probably our most versatile model. This 2-bike fork-mount rack is designed to attach to your car’s roof, trunk, or your SUV’s back glass. The HDPE body flexes to conform to your car’s curves. With four 6-inch SeaSucker vacuum mounts, this rack has plenty of muscle. Fits on virtually any car. Minimal assembly required.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
The B.A.T. Locking Cable keeps your bike and rack where you want them: attached to your vehicle, as opposed to stashed away in some thief's garage. This braided stainless-steel cable is 8-feet long and vinyl coated to protect your vehicle and gear.
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
$298.00 - $329.99
Kuat's Transfer 2 offers all the Kuat quality you'd expect at a price that appeals to privateer racers and weekend riders alike. It fits both 1.25 and 2-inch trailer hitches and its stout steel construction won't leave you hanging, or your precious cargo bouncing around on the road. Bikes mount securely and easily with an adjustable locking arm and wheel tray. Best of all, there's no contact with the frame so your bike will come off the rack looking just as good as when you put it on. The wheel trays hold up to a four-inch-wide tire and the rack holds bikes with wheels anywhere from 20 to 29 inches.
$39.00 - $59.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-ubcg hitches out of the box. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 15 pounds. - Made in Madison, WI.
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
RockyMount's Brass Knuckles rack gets your bike from point A to point B with the minimum of hassle and the maximum of security. The aluminum arm uses finely indexed ratcheting to hold front bike wheels from 20- to 29-inches with widths from skinny road tires to fat DH monsters. Form-fitting mounting hardware plays nicely with almost any roof-mounted bars: round, square, or aero. When your bike isn't on the roof, the arm folds down for an extremely low profile for minimal wind noise and maximum gas mileage. For extra security, you can lock the bike to the rack and the rack to your car with lock cores (sold separately).
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Yakima's CopperHead includes a wheel tray, a ratcheting wheel strap and a fork mount featuring an ergonomic, long-throw skewer for easy loading (simply opening the skewer clears most fork safety tabs). The fork mount is aerodynamic and ultra stable. Universal snap-around mounts allow the CopperHead to attach equally well to round and square crossbars, too.
Keep your bikes safe and sound with the Saris Bike Porter Hitch 4-Bike Locking rack. Its durable T-design steel frame hauls four bikes of up to 35 pounds each and fits both standard hitch sizes. A locking cable gives you peace of mind, ratcheting anti–sway straps secure and stabilize your bikes, while grooved rubber cradles separate the bike's shift and brake cables from the frame. The rack folds down to the ground so you can access the back hatch of your car, plus the top bar folds down out of the way when not in use.
Page 1 of 2 Next page